The crocodile shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, scrap steel plants, etc.
The crocodile shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, scrap steel plants, etc. It can cut various shapes of steel and various metal materials in cold state. The crocodile shearing machine is based on its structural principle. Similar to the crocodile, it is named after the crocodile. Because of its simple design structure, low failure rate, high shear pressure, and low maintenance cost, it has been unanimously recognized by the market.
The crocodile shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, scrap steel plants, etc. It can cut various shapes of steel and various metal materials in cold state. The crocodile shearing machine is based on its structural principle. Similar to the crocodile, it is named after the crocodile. Because of its simple structure, low failure rate, high shear pressure and low maintenance cost, it has been unanimously recognized by the market.
According to the equipment model, our company's crocodile shears are divided into 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, 1600mm, 1800mm according to the length of the blade. According to the equipment cutting force, it is divided into 9 grades from 40 tons to 500 tons, which can be different Customers provide complete equipment selection programs.
The crocodile shearing machine is a pair of upper and lower crocodile shearing structure. The working principle is driven by a hydraulic pump to form pressure. Under the control of the electromagnetic reversing valve and the oil circuit, the oil cylinder can be raised and contracted. The upper crocodile and the lower crocodile fixed knife realize the interactive shearing of the upper crocodile knife and the lower crocodile fixed knife under the continuous pushing action of the main oil cylinder to realize the interactive shearing of the material that enters the incision. shear.
| Shearforce(tons) | Pressingforce(tons) | Bladelength(mm) | Shearmouthheight(mm) | Shearfrequency(times/PM) | Shearmaterialsspecification(mm) |
| 63 | 16 | 600 | 280 | 9-16 | 30X30 Ø35 |
| 100 | 16 | 600 | 280 | 9-16 | 40X40 Ø45 |
| 120 | 20 | 600 | 280 | 9-16 | 45X45 Ø50 |
| 160 | 25 | 700 | 320 | 9-16 | 55X55 Ø63 |
| 200 | 25 | 800 | 380 | 9-16 | 65X65 Ø75 |
| 250 | 26 | 1000 | 480 | 9-16 | 70X70 Ø80 |
| 315 | 42 | 1200 | 520 | 8-16 | 80X80 Ø90 |
| 400 | 42 | 1500 | 700 | 8-16 | 90X90 Ø100 |
| 500 | 42 | 1800 | 900 | 8-16 | 100X100 Ø110 |
If you need our products please write down any questions, we will reply as soon as possible.
